by Mike Sessler, ChurchTechArts.org


 

Soundcheck time can be one of the most productive times of the weekend from an audio standpoint. It can also be one of the most frustrating. I have seen a soundcheck turn normally mild-mannered and reserved musicians and engineers into angry combatants. My brothers, this should not be. Soundcheck can be very efficient, productive and dare I say fun; but we have to do a little work first. Because there are so many different ways to do a soundcheck (and so many different church situations), I’m not going to prescribe one “perfect” way. What I want to do instead is offer a series of suggestions that hopefully apply to all situations, and you can create your own plan. Sound good? Here we go…


Line Check First

Few things will frustrate your musicians more than having to stop soundcheck to troubleshoot a bad cable, DI or patch. Before the band even arrives, go through and line check every single line that you’re using that weekend. Even if it’s the same cable you used last week, in the same channel with the same processing. We typically don’t check the actual DIs themselves, but we do pull the mic cable out, attach a 57 to it and make sure we have signal. If it’s an active DI, make sure phantom power is on. And don’t forget the wireless mics. Make sure those are on and working.


Declare Your Intentions

A few minutes before soundcheck is slated to start, I will get on the talkback and say something like, “Hey everyone, good afternoon. We’re going to start soundcheck in 2 minutes, so if you could get plugged in and in place with your ears in and ready to go, it would be great!” Once we actually start, I’ll say something like this, “Hey guys, we’re going to go through each channel one at a time so I can get levels. Once you hear the level stop changing, you can set it in your ears (we use personal mixers). If we can have only the instruments I ask for playing it will make it go really quickly. Let’s start off with the kick.” Making sure everyone knows what is coming up will help them stay focused. This is important because as we all know, most musicians are very ADD.


Stay Organized

Some like to start from the bottom (drums and bass) and work their way up to the top (vocals). Others work in reverse order. Personally I prefer and normally do the former, but which way you go is up to you, and depends on your situation. Whatever you do, stay organized. Don’t start with the kick, then do piano, then guitar, then snare, then vocals, then cymbals. Develop a logical order that works through each instrument and stick with it. Use the same order every week. I suggest you talk through this order with your worship leader in advance as well, just to make sure what you’re doing works for the musicians as well.


Work Quickly, With the Big Picture in Mind

What you want to do during soundcheck is get the levels dialed in to roughly where everything should sit in the mix. You might do some quick EQ and on drums perhaps tweak the gate or comp. But do it quickly. No one wants to hear the drummer hitting quarter notes on the snare for 15 minutes. Ideally, you’ve paid attention to where your gate and comp settings should be and have already preset them so you’re only tweaking. Same goes for gains, if you can manage it (digital consoles are great in this regard). If you have 30 minutes for soundcheck and you spend 25 getting the drums dialed in, it will be tough to take care of the rest of the band in the remaining five minutes. Get things close and move on. You can always come back and tweak settings after rehearsal gets underway.


Pre-Build Monitor Mixes

If you’re mixing monitors from FOH (and even if you aren’t), it’s not a bad idea to pre-build some rough monitor mixes before you start. I know most of my vocalists well enough to know roughly what they like in their monitors from week to week, so I’ll normally start a mix before they get there. Then it’s a simple matter of tweaking. It also really helps musicians through the soundcheck process if they can hear themselves right away. Start with the gains and monitors a little lower than you think you’ll need, and work up.


Get the Vocals to Sing

There are few things as unhelpful during soundcheck than having vocalists speaking, “Check 1,2…” Guitar players constantly noodling is a close second, but I digress. I like to have all the vocals sing a chorus while I dial in gains. We’ve told our vocal team, don’t worry about your monitor mix just yet, simply sing. Usually we’ll have the piano or guitar play along for pitch, but it should otherwise be only vocals. Have them keep looping until you have their levels dialed in. Of course, starting with rough gains and monitors makes this go faster.

You’ll notice a consistent theme running through this post; get things ready beforehand. The start of soundcheck is not the time to be peeling out the board tape and labeling the desk. By the time the band is set up, you should have completely line-checked, roughed in your gains and pre-built rough monitor mixes. Starting from scratch can be a good thing once in a while, but if you know roughly where things end up each week, starting a little below that makes things go a lot faster.

We have our soundcheck down to about 20-25 minutes right now, and that’s with a full band with 2-3 vocal monitor mixes. Soundcheck doesn’t have to be a painful process. Take some time to develop a system that works well for you, pre-build as much as possible, then communicate clearly to the band. Soon you’ll find it going more smoothly and both you and the band will have more time for rehearsal.

 

Leave a comment

All comments are moderated before being published